Product Introduction
1.Materials
Desiccant Specifications
⑴Calcium chloride based
⑵Able to absorb more than 200 percent its weight at 25°C,RH80%.
⑶Complies with FDA, EPA, EFSA regulations for food safety, environmental safety, and non-toxic disposal
The desiccant must be free from DMF (see EU directive 2009/251/EC)
( Remark:Dimethyl Fumarate is a biocide used to prevent mould growth on products but can leak from the
desiccant bag and contaminate the food. )
2.Material application
Desiccant should be placed in the area with the greatest concentration of moisture vapor, therefore the following two options are available:
⑴Seal all passive container vents with duct-tape.
⑵Container floor, check the moisture content (MC),a high MC in excess of 20% can increase risk of moisture damage.
⑶Desiccant should be evenly hanged at the top of the container side walls.
TOPDRY Desiccant is used in the protection of a wide range of cargoes including agricultural products, wooden products, electronic goods, leather goods, metal products and textiles.
3.Disposal
A licensed contractor or carrier should dispose of desiccant according to country regulations.
The desiccant (Calcium Chloride) can be disposed with regular waste.
TOPDRY Desiccant
TOPDRY desiccants is a dehumidifier product that are used to control the moisture inside the container.
It prevent the water vapour in the container to reach its dew point and becomes water.Thus this help to protect the cargoes against damage causes by the moisture during shipment.
TOPDRY desiccants can absorb up to 200% of its own weight for 60-90 days when its fully maximize.
With its high absorption , lesser unit is require to be use for per shipment. Thus this lead to cost saving and increase of efficiency.
TOPDRY desiccants is an non toxic product comprise of calcium chloride and a food grade binding agent.
It is easily disposable due to its non toxic component thus no special handling or manpower are required.
TOPDRY desiccants after absorbing the moisture will become gel because of the binding agent.
This will eliminate the chances of water leaking out from the desiccants and damage the cargoes.
Final quality assurance
At Lindia Chemicals Company we lay immense emphasis on expanding our market through achieving maximized customer satisfaction. Key to this is keeping tight control on the quality of all our products. To provide products that match up to relevant quality parameters, we constantly incorporate rigorous quality control measures into our manufacturing processes.
Ø Our products are routinely tested by Inspection and Verification Companies such as SGS; a world renowned company in this field.
Ø We are happy to furnish test reports certifying that none of our products contain Dimethyl Fumarate.
We provide test reports on a regular basis with each and every batch.
